ASTM A36 and ASTM A572 are two commonly used structural steel standards. Due to their excellent performance, they are widely used in various fields, such as industrial manufacturing, bridge and building construction. ASTM A572 consists of five different grades: 42, 50, 55, 60, and 65, each with slightly different chemical and mechanical properties.

Cold rolling and hot rolling are two common rolling processes, which are used to roll semi-finished billets produced by steel mills into qualified steel. The rolling of steel is mainly hot rolling, and the cold rolling mainly produces steel products with higher precision.

A572 GR.50 plates are steel plates of high strength and low alloy structure. Meets ASTM A572Standard Specification for High-Strength Low-Alloy Columbium-Vanadium Structural Steel. It has excellent strength and good toughness, and is widely used in various fields because of its good mechanical properties and weldability.

Coated pipes play an important role in the fields of energy, infrastructure and industry because of their excellent anti-corrosion, anti-wear and low maintenance costs. With the growth of global demand for sustainable infrastructure and energy solutions, the application and demand of coated pipes in the market are gradually increasing. Among them, the common coatings are mainly 3PE/PP, single/double layer FBE, coal tar epoxy resin and so on. Among them, 3PE/3PP is the most widely used.

The coating on the inside of the pipe can effectively isolate the direct contact with corrosive gases or fluids, reduce the corrosion of the pipe and improve the smoothness of the inner wall of the pipe, improve the flow of fluids, enhance the efficiency of transportation, and reduce the accumulation of sediments.

ASTM A36 steel is a common structural steel that can be used in many fields. It is a mild steel with good strength, formability and excellent weldability. Due to its characteristics, this steel plate is widely used in many fields such as construction, agriculture, and automobiles. ASTM A36 steel plates can also be used in other applications such as bolts, nails, screws and other fasteners.

Steel plate is a flat steel made of molten steel after being rolled or cut. Because of its excellent performance and diversified uses, it is widely used in construction, manufacturing and various industrial fields.

Because of its excellent mechanical properties and corrosion resistance, seamless steel pipes are widely used in construction, chemical industry and other industries. However, in the process of use, cracking problems occasionally occur, not only causing material waste, but also increasing the cost and project delay risk.

Seamless steel pipe is a kind of thin steel with hollow cross-section and no joints around. They are widely used in a variety of industries, mainly for fluid transport, including the transport of oil, natural gas, natural gas, water and certain solid materials. Compared with solid steel materials such as round rods, seamless steel pipes are lighter in weight while maintaining similar yield strength and tensile strength, making them economically viable structural and mechanical components. They are commonly used in the manufacture of structural elements and mechanical components such as oil drill pipe, car drive shafts, bicycle frames and steel scaffolding used in construction.

Stainless welded steel pipe will have a certain degree of deformation in the use or production process. This situation is influenced by many factors.

Stainless welded steel pipe can be seen everywhere in our daily life, such as handrails, railings and so on. Among them, stainless steel welded pipes are also often used in the construction industry and industry. The production process of stainless welded steel pipe is more complex, and there are strict requirements for production technology. Stainless welded steel pipes have strong stability and corrosion resistance, and different stainless welded steel pipes have different functions.

A106 and A53 are the most commonly used carbon steel pipe types in industry today, and they are very similar. However, there are some differences in material, production process, application and so on. Although the gap between them is very small, they are irreplaceable in certain aspects.

In addition to different materials, pipes come in a variety of sizes, classified according to specifications, and SCH40 steel pipe is one of the most commonly used materials in a variety of building and construction applications. With moderate strength, durability and low cost, it is suitable for applications with moderate pressures and temperatures.

Straight seam steel pipe and spiral steel pipe are two common types of welded steel pipe, they are different in the production process, structural characteristics, application fields and so on.

ASTM A106 Gr.B A seamless carbon steel pipe material in line with ASTM standards, the steel pipe made of this material is specially used for transportation under various high temperature and high pressure environments, often used in oil, natural gas, chemical, electric power and other industries, for conveying high temperature water, gas, oil and so on.